Measurement Computing's PCI-DIO96H is a high-density, logic level,digital I/O board for PCI bus compatible computers. The PCI-DIO96H offers 96 bits of digital I/O. It provides the I/O in 24-bit groups based on an 82C55, mode 0 emulation. Each group provides an 8-bit port A and port B, as well as an 8-bit port C that can be split into independant 4-bit port C-HI and a 4-bit port C-LO.
The digital outputs drivers are 74S244 chips and provide 64 mA sink and 15 mA source current capabilities. The input buffers are 74LS373 and offer the high standard input impedance of the 74LS series. On power up and reset, all I/O bits are set to input mode. Like all members of the 74LS series, unconnected inputs will typically float high. If you are using the board to control items that must be OFF on reset, you will need to install pull-down resistors. Provisions have been made on the board to allow users to quickly and easily install SIP resistor networks in either pull-up or pull-down configurations.
The PCI-DIO96H is completely plug-and-play. There are no switches or jumpers on the board. All board addresses are set by your computer's plug-and-play software.
"When we started designing these systems, we needed to locate a robust data acquisition unit that we could trust, have multiple inputs and a simple but effective software interface and a reasonable price." Michael Gray, Precia Molen
"We have used MCC devices for many years on any number of different projects, from pile testing to seismic tests, and we've always been more than satisified with their performance. This was the natural choice for us." Stephen Kemp, Manager, GBG Structural Services
